22
TO ACTIVATE CLUB SELECTOR:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 1 second and then release to enter
the Quick Set Menu.
3) Verify that TGR is turned on; if TGR is not activated,
you will not be able to enter club selections. See “To
Activate TGR” above.
4) Press and release MODE until “club” is displayed.
5) While “club” is shown in the lower portion of
the display, press and release POWER as necessary
until “On” is shown in the upper portion of the display.
6) To save the changes and return to ranging mode,
let the unit sit idle for at least 30 seconds until an automatic
power-down occurs, or simply press and hold MODE for at least 2
seconds. To continue through the Quick Set Menu and manipulate
another feature, press and release MODE until the appropriate mode is
displayed.
To Next Page
Loading...
Need help?
General
