What to do if EDM does not close on Leuze electronic Lighting Equipment?
If the EDM (External Device Monitoring) does not close on your Leuze electronic Lighting Equipment, actuate the start button if available.
What to do if EDM does not open on Leuze electronic Lighting Equipment?
If the EDM (External Device Monitoring) does not open on your Leuze electronic Lighting Equipment, actuate the start button if available.
What to do if receiver and transmitter channels are mismatched on Leuze electronic Lighting Equipment?
To resolve the issue where the receiver is set to C1 and the transmitter to C2 on your Leuze electronic Lighting Equipment, set both the transmitter and receiver to the same transmission channel and ensure they are correctly aligned.
Why did the operating mode change on my Leuze electronic MLC 500?
If the operating mode has changed on your Leuze electronic Lighting Equipment, check the wiring and restart the sensor.
What to do if reset button actuation duration exceeded on Leuze electronic Lighting Equipment?
If the actuation duration (2.5 min) has been exceeded for the reset button or the cable is short-circuited on your Leuze electronic Lighting Equipment, press the reset button. If the restart is unsuccessful, check the wiring of the reset button.
How to resolve an external fault in Leuze electronic Lighting Equipment?
If there's an external fault with your Leuze electronic Lighting Equipment, check the connection of the cables and the control signals.
What to do if Leuze electronic MLC 500 Lighting Equipment detects a foreign transmitter?
If your Leuze electronic Lighting Equipment detects a foreign transmitter, remove any foreign transmitters present and increase the distance to any reflective surfaces. If available, actuate the start button.
How to unlock start/restart interlock on Leuze electronic MLC 500?
If the start/restart interlock is locked on your Leuze electronic Lighting Equipment, and the protective field is free and ready for unlocking, and if there are no people in the danger zone, operate the reset button.
What to do if Leuze electronic MLC 500 Lighting Equipment device failed?
If your Leuze electronic Lighting Equipment device has failed, replace it.
How to fix a defective transmitter in Leuze electronic MLC 500 Lighting Equipment?
If the transmitter of your Leuze electronic Lighting Equipment is defective, replace it.
General| Brand | Leuze electronic |
|---|---|
| Model | MLC 500 |
| Category | Lighting Equipment |
| Language | English |
To Next Page
