Need help?Do you have a question about the Leuze electronic MLD 500 and is the answer not in the manual?
General| Brand | Leuze electronic |
|---|---|
| Model | MLD 500 |
| Category | Security Sensors |
| Language | English |
Defines the intended use and potential misuse of the safety sensor.
Details uses that are considered improper and potentially dangerous.
Prerequisites and qualifications for personnel handling the safety sensor.
Outlines responsibilities of manufacturer and operating company.
Details the optional laser alignment aid for precise adjustment.
Prevents automatic system restart after safety circuit activation.
Monitors feedback circuits of connected contactors for safety.
Describes testing the safety sensor's function periodically.
Temporarily suppresses protective function for object transport.
Explains muting activated by two sensors in a timed sequence.
Describes muting activated by two sensors in a specific sequence.
Details muting using four sensors in a timed sequence.
Details the six different operating modes for muting functions.
Explains use of safety sensors for guarding access points and danger zones.
Guidelines for mounting safety sensors with adequate safety distance.
Formulas and examples for calculating required safety distances.
Specific calculations for vertical fields considering reach-over.
Guidelines for positioning muting sensors.
Arrangement details for timing controlled 2-sensor muting.
Detailed steps for alignment using the laser aid.
Explains the function and operation of the start/restart button.
Procedures and checklists for initial startup and post-modification testing.
Periodic testing requirements for safety sensors by qualified personnel.
Steps to identify and address sensor failures using display elements.
Lists and explains error messages from the 7-segment display.
To Next Page
