What to do if the input level at the electrical inputs of my Leuze RSL 425 Scanner is unclear?
If the input level at the electrical inputs of your Leuze Scanner is unclear, start by checking the wiring of the safety sensor. If the issue persists, try replacing the safety sensor or reconfiguring it. Ensure that the replacement sensor type matches the type stored in the connection unit or in the Sensor Studio software.
Defines the proper application and purpose of the safety sensor.
Details sensor application for mobile danger zone guarding on AGVs.
Provides formulas and guidelines for calculating safety distances.
Outlines the essential steps for defining the sensor's safety parameters.
Explains how to set up protective and warning fields.
Details checks required before initial operation and after modifications.
Provides guidance on actions to take in case of sensor failure.
Details safety certifications like SIL and Performance Level.
To Next Page
General