Need help?Do you have a question about the Leuze IT 4715 and is the answer not in the manual?
General| Protection Rating/Class | IP 65 |
|---|---|
| Field of View | Vertical: 30° |
| Operating Temperature | 0°C to +50°C |
| Power Supply/Operating Voltage | 10 ... 30 VDC |
| Interfaces | USB |
| Storage Temperature | -20 ... 70 °C |
Lists the available scanner models within the IT 4715 series.
Details the process of connecting the scanner to a cable and power.
Explains how to use the aiming beam for optimal bar code reading.
Provides tips for scanning highly reflective bar codes.
Presents a sample bar code for verifying scanner functionality.
Details the pin assignments for TTL-RS 232 cables (external and PIN9).
Describes the pin configuration for the USB-A connector.
Illustrates reading fields for SR-1 models at different distances and code types.
Shows reading fields for SF-1 models with various code types and distances.
Instructions and warning for resetting the scanner to its factory default state.
Details connecting and configuring the scanner via the RS 232 serial interface.
Configuration settings for the Leuze standard serial communication protocol.
Instructions for connecting the IT 4715 to the MA 41 DP-k via RS 232.
Details the KB 021 Z cable pinning and connection to the MA 21.
Explains using the IT 4715 in keyboard-wedge mode via USB.
Guides on installing the driver and configuring the COM port emulation via USB.
Details commands for activating and deactivating scan operations remotely via RS 232/USB.
Describes the use of the internal trigger button accessible with a tool.
Compares different IT 4715 scanner models and their interfaces.
Lists available accessories, their descriptions, and part numbers.
Details connecting the IT 4715 to the Leuze multiNet Plus system.
Guides on connecting the IT 4715 to a PROFIBUS gateway.
Explains how to connect the IT 4715 to Interbus gateways.
To Next Page
