EasyManua.ls Logo

Leuze IT 4715 - Technical Data; TTL-RS 232 Cable Pinout; USB Cable Pinout

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Leuze electronic
Quickstart guide IT 4715 Leuze electronic Page 5
Technical Data
Please refer to the corresponding data sheet
Pinning of the cables
TTL-RS 232-cable/ ext IT 4xxx Art-No. 501 04442
Pinning 9 pin-D-sub connector (female) at the cable 42203758-04
PIN-number Signal Description
1 Shield Shield
2 TX Transmit data (-5 to +5V)
3 RX Receive data (-5 to +5V)
5 GND Signal ground
7 CTS Clear to send
8 RTS Request to send
PIN at power connector Signal Description
1 VCC IN 4,5 - 12 Volt DC
2 GND Ground
The suitable power supply for the IT 4xxx (100-240 V / 47-63 Hz) is the article number 501 03403.
TTL-RS 232 cable/ PIN9 IT 4xxx Art-No. 501 04586
Pinning 9 pin-D-sub connector (female) at the cable 42203758-03
PIN-number Signal Description
1 Shield Shield
2 TX Transmit data (-5 to +5V)
3 RX Receive data (-5 to +5V)
5 GND Signal ground
7 CTS Clear to send
8 RTS Request to send
9 VCC IN 4,5 - 12 Volt DC
USB-cable IT 4xxx Art-No. 50103404
Pinning of the USB-connector at the cable 42203758-03
USB-type A-connector Signal Description
1 VCC IN 5 Volt DC
2 Data - Data -
3 Data + Data +
4 GND Signal ground