- 12 -
4. System Configuration
DSA-1000 is designed specifically to operate in conjunction with all Gateways/Controllers. If you are not
using default settings, before connecting DSA-1000 to your Gateway/Controller, some configurations steps
are required. The configuration instructions for Gateways/Controllers and DSA-1000 are covered in the
following sections.
4.1 DSA-1000
DSA-1000 supports web based configuration. By factory default, DSA-1000 web interface can be ac-
cessed with IP address: 192.168.1.10
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
Step1:
Configure administrator PC’s TCP/IP settings with a static IP address that is under the same subnet mask
as DSA-1000. For example: 192.168.1.20
To Next Page
Loading...
Need help?
General
