- 16 -
5. Operation Instructions
After completing the Hardware Setup and the devices are physically connected, the system is ready for
operation. This section will describe how to operate DSA-1000 to printout tickets for enabled billing plans.
1. Select an enabled billing plan number on DSA-1000 by or button. The numeric LED dis-
play on the center of the device represents the billing plan number currently selected.
Press button on DSA-1000 to create and print out an on-demand account of the selected billing
plan. THERMAL PRINTER will print out the ticket with the text format (Without background image) con-
figured on your Gateway/Controller in Ticket Customization.
Note:
If you are unable to get a ticket printout after pressing ENTER, please
check if the selected plan is enabled.
To Next Page
Loading...
Need help?
General
