Need help?Do you have a question about the LevelOne FCS-0030 and is the answer not in the manual?
General| Connectivity | Wired |
|---|---|
| Image Sensor | 1/3" CMOS |
| Frame Rate | 30 fps |
| Minimum Illumination | 0.5 Lux |
| Day/Night | Yes |
| Network Interface | 10/100 Mbps Ethernet |
| Operating Temperature | -10°C to 50°C |
| Audio | No |
| Compression | MJPEG |
| Network Protocols | TCP/IP, HTTP, SMTP, DHCP, DNS |
| Power Supply | 12V DC |
| Resolution | 640 x 480 (VGA) |
| Lens | 3.6mm fixed |
Lists the items included in the product package, essential for initial setup and verification.
Details the necessary hardware and software specifications for installing the network camera.
Provides instructions for physically connecting the network camera to the power and network.
Guides users through the process of installing the camera's software and configuration wizard.
Verifies network configuration, including subnet mask and gateway, for camera access.
Emphasizes setting a new password for administrator accounts as a security practice.
Describes the login process requiring username and password for accessing the camera interface.
Explains the need for and process of installing browser plug-ins for viewing camera feeds.
Configure camera video and audio parameters like resolution, codec, and quality.
Customize video overlay and configure the RTSP server for streaming.
Manage audio settings and network multicast for efficient data delivery.
Configure wired network connection using DHCP, static IP, or PPPoE.
Enable UPnP for discovery and DDNS/TZO for remote access.
Utilize Level1DNS service for remote IP camera access via the internet.
Configure SSID, network mode, and basic wireless parameters.
Implement WEP, WPA-Personal, or WPA2-Personal for secure wireless communication.
Configure advanced wireless features and Wi-Fi Protected Setup for network enhancement.
Set up motion detection zones, sensitivity, and thresholds for event triggering.
Configure notifications for triggered events via FTP, SMTP, or HTTP.
Configure PIR sensor sensitivity for motion detection and control the illumination light.
View and save system logs for monitoring and troubleshooting network camera operations.
View detailed system info: MAC addresses, firmware version, and product details.
Review current network settings: IP address, subnet mask, and DNS servers.
Create, modify, and manage user accounts with different privilege levels for system access.
Control network access with IP filters and update the camera's firmware for new features.
Export/import settings, reset to factory defaults, and reboot the network camera.
To Next Page
