Need help?Do you have a question about the LevelOne FCS-4201 and is the answer not in the manual?
General| Video Compression | H.264, MJPEG |
|---|---|
| Form factor | Bullet |
| Connectivity | Wired |
| Sensor size | 1/2.7" |
| Sensor | CMOS |
| Ingress Protection | IP66 |
| Resolution | 1920 x 1080 |
| Network Interface | 10/100 Mbps Ethernet |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to 50°C |
| Frame Rate | 30 fps |
| Network Protocols | HTTP, HTTPS, TCP/IP, UDP, FTP, SMTP |
| Operating Humidity | 10% ~ 90% RH (non-condensing) |
| Day/Night | Auto |
Specifies the minimum hardware and OS requirements for camera monitoring and recording applications.
Describes how to connect the camera using PoE-enabled and non-PoE switches.
Guide to installing the IP Finder utility for discovering camera IP addresses on the network.
Steps for the first-time access and plug-in installation for viewing camera feed.
Manages user privileges, changing root password, and adding/updating user accounts.
Configuration for network type (LAN/PPPoE), IP address, and DDNS settings.
Interface for controlling pan, tilt, zoom, focus, and preset positions.
Resets system settings to factory defaults, excluding network type and root password.
Process for upgrading the camera's firmware, with important warnings.
Common issues and their solutions, including LED status, cable types, and firewall configurations.
To Next Page
