Need help?Do you have a question about the LevelOne FCS-3083 and is the answer not in the manual?
Instructions for drilling mounting and cable holes on installation surface.
Guide for preparing waterproof cable connections using cable glands.
Steps for physically mounting the camera onto the installation surface.
Details on connecting digital input/output devices to the camera.
Explains how to set up IP addresses for camera network communication.
Instructions on accessing the camera via web browser and its interface.
Instructions for drilling mounting and cable holes on installation surface.
Guide for preparing waterproof cable connections using cable glands.
Steps for physically mounting the camera onto the installation surface.
Details on connecting digital input/output devices to the camera.
Explains how to set up IP addresses for camera network communication.
Instructions on accessing the camera via web browser and its interface.
General| Compression | H.264, MJPEG |
|---|---|
| Network Interface | 10/100 Mbps Ethernet |
| Infrared cut-off filter | Yes |
| Night vision | Yes |
| Wi-Fi | No |
| Mobile operating systems supported | iOS, Android |
| DC input voltage | 12V |
| Frame Rate | 30fps |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to 50°C |
| Minimum Illumination | 0 Lux with IR |
| Night vision distance | Up to 30m |
| Supported network protocols | TCP/IP, HTTP, DHCP, NTP, UPnP, RTSP, PPPoE |
| Operating Humidity | 10% ~ 90% non-condensing |
To Next Page
