Hardware Manual
32
How to Replace the Dome Cover
For more discrete surveillance needs, the bundled dome cover can be replaced with a smoke,
vandal proof cover available for purchase. To replace the dome cover, do the following:
1. Loosen the three (3) screws to open the dome cover.
2. Using a screwdriver, remove the screw securing the spring wire to the dome cover.
NOTE: Hold the spring wire as the screw is being removed to avoid the sudden release of the
screw and cause it to fly in the air.
3. Remove the three (3) screws to detach the cover bracket.
To Next Page
Loading...
