Need help?Do you have a question about the LevelOne FCS-1132 and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Camera Type | Network Camera |
| Resolution | 640 x 480 |
| Lens | 3.6mm fixed |
| Video Compression | MJPEG |
| Network Interface | 10/100Mbps Ethernet |
| Connectivity | Wired |
| Protocols | TCP/IP, HTTP, SMTP, FTP, DDNS, DHCP, NTP |
| Power Supply | DC 5V |
| Operating Temperature | 0°C ~ 50°C |
| Scanning System | Progressive |
| Video Output | No |
Reboots the camera by pressing the reset button for one second.
Restores factory default settings by holding the reset button for ten seconds.
Connects the camera using Ethernet and power cables for basic setup.
Details connecting the camera to PoE-enabled or non-PoE switches.
Verifies network configuration for proper camera access.
Establishes a secure administrator password to protect the camera.
Configure camera settings, video codecs, resolution, and audio options.
Settings for video streams, overlays, and RTSP server configuration.
Configure network connection via DHCP, Static IP, or PPPoE.
Define events and schedule actions to be performed automatically.
Configure motion detection zones, sensitivity, and threshold levels.
Configure FTP server for sending event-related files.
To Next Page