7
c. For wall installation:
i. Chose the location on the wall to place the camera.
ii. Drill four holes through the center of the four location holes on the
sticker.
iii. Hammer the four plastic anchors which are provided in the product
package into the four location holes.
iv. Mount the camera on the wall and position the four screw slots over
the plastic anchors. Insert the screws into the holes and use the
screwdriver to tighten the screws clockwise until they are secure.
d. For ceiling installation:
Mount the camera device on the desired location. Use the screwdriver
To Next Page
Loading...
