Hidden SSID :
Everyone in this area cannot search for the SSID. You can only
connect successfully by manually entering the correct SSID and
password.
Shows the Channel on which the AP is currently broadcasting.
The range of available channels is determined by the mode of the
radio interface and the country code setting. If you select Auto for
the channel setting, the AP scans available channels and selects a
channel where no traffic is detected.
The channel defines the portion of the radio spectrum the radio
uses for transmitting and receiving. Each mode offers a number of
channels, depending on how the spectrum is licensed by national
and transnational authorities such as the Federal Communications
Commission (FCC) or the International Telecommunication Union
(ITU-R).
To Next Page
Loading...
