Need help?Do you have a question about the Leventi Bakermat and is the answer not in the manual?
Visual overview of potential hazards and safety symbols.
Details on CE conformity and compliance with standards.
Guidelines for maintenance and repairs by qualified personnel.
Defines the approved purposes and activities for the oven.
Instructions for safely removing hot baking trays to prevent injury.
Precautions regarding electrical safety and power connection.
Warnings about hot surfaces and steam, recommending oven mitts.
Safety features and usage guidelines for the Booster function.
Specific safety guidelines for using the Booster function.
Procedures for handling fire, water nuisance, and power failure.
Critical warnings for Booster oven use, related to heating drinks and sealed containers.
General information about the Leventi furnace as a convection oven.
Specifies the allowed uses for the oven as per the manual.
Mentions different oven types available in the range.
General information on operating the oven, its display, symbols, and buttons.
Description of the Digital oven's display, symbols, and buttons.
Introduces preparation methods for Mastermind and Digital ovens, detailing phases like Preheat, Moist, Time, Regeneration.
Step-by-step guide to turning the oven on.
Instructions for selecting and starting programmes on the Mastermind oven.
Guide to setting the oven to manual operation mode.
Steps for starting preparations on the Digital oven.
Instructions for switching off the oven and disconnecting power.
Steps to select a group, programme, and start it.
How to temporarily or completely stop a running programme.
Guide to setting up and starting manual operation on Mastermind.
How to set a delayed start for a programme on Mastermind.
Adjusting settings like temperature during an active preparation.
Using the table planner for setting multiple independent cooking timers.
Organising programmes into groups for easier management.
Creating new groups to categorise programmes.
Removing existing groups from the programme management.
Modifying existing programmes, including phases and settings.
Creating and saving new preparation programmes.
Duplicating existing programmes to save time.
Removing programmes from the system.
Accessing programme details without making changes.
Explanation of the tag memory card and its function.
Instructions on how to insert, use, and remove the tag.
Overview of actions available within the tag menu.
Procedures for transferring programmes from tag to oven.
Instructions for saving programmes from the oven to the tag.
Managing tag memory, deleting programmes, and formatting.
How to close a tag session without saving changes.
Customising settings for the Mastermind oven.
Changing the oven's display language.
Adjusting the oven's internal clock and date.
Customising the initial menu displayed upon startup.
Setting, changing, and disabling the PIN code for security, including forgotten PINs.
Adjusting display contrast and backlight for readability.
Configuring the oven's communication port for various functions.
Settings specific to the Digital oven model, including date and time.
Overview of Convection and Combisteaming cooking methods.
Advice on preheating, checking product readiness, and baking techniques.
Guidelines for baking frozen products like Puff Pastry and proved dough.
Essential safety precautions for maintenance and cleaning tasks.
General guidelines and agents for cleaning the oven.
Step-by-step cleaning process for Mastermind systems.
Step-by-step cleaning process for Digital systems.
How to pause, abort, or end an ongoing cleaning cycle.
Specific safety instructions for cleaning detergents and Safepack.
Steps to replace the cleaning fluid Safepack.
Instructions for emptying the fat separator.
Cleaning guidelines for stands, trolleys, hoods, and trays.
How to clean the oven's drain grating.
Recommended procedure for flushing and cleaning the drain.
Procedure for manually descaling the oven chamber, especially with direct injection.
General information about the oven's boiler and its maintenance.
Process for decalcifying the boiler, including Mastermind and Digital.
Importance and maintenance of the water softener.
Minor maintenance tasks for the oven, including filter changes and lighting replacement.
Step-by-step guide for replacing the oven door seals.
Warning against self-resetting after power failure; requires technician.
Lists common maintenance-related messages and their meanings.
Describes errors caused by incorrect user actions or attempts.
Details system errors, their reports, and recommended actions.
Information on rare but critical fatal errors and their handling.
Details on water supply, drainage, and electrical connections.
Recommendations for oven placement and installation.
Information on the number of trays and oven capacity.
Physical dimensions and weight of the oven models.
Requirements for extraction systems and hoods.
Details on noise levels and operating temperature range.
Guidelines for safe transportation of the oven.
Contact information for Leventi, including phone, fax, and email.
Contact details for the Customer Services Department.
To Next Page
General