Leviton 476TM-652 User Manual

Twist & Mount Patch Panel
IMPORTANT
INSTRUCTIONS
1.Read and understand all instructions. Follow all warning
and instructions marked on the product.
2.Do not use this product near water-e.g., near a tub, wash
basin, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.
3.Never push objects of any kind into this product through
openings, as they may touch dangerous voltages.
4.SAVE THESE
INSTRUCTIONS.
SAFETY INFORMATION
1.Never install communications wiring or components during
a lightning storm.
2.Never install communications components in wet locations
unless the components are designed specically for use in
wet locations.
3.Never touch uninsulated wires or terminals unless the
wiring has been disconnected at the network interface.
4.Use caution when installing or modifying communications
wiring or components.
5.To prevent electrical shock, each opening must be lled
with a module.
CAT 5e CAT 5e CAT 6 CAT 6
CAT 6 CAT 6
Additional Insert Options
Call 1-800-824-3005
Additional Insert Options
Call 1-800-824-3005

Leviton 476TM-652 Specifications

General

Brand	Leviton
Model	476TM-652
Category	Cables and connectors
Language	English

Summary

IMPORTANT INSTRUCTIONS

SAFETY INFORMATION

GETTING STARTED

Planning Cable Distribution

Plan cable routing to determine the correct distribution panel for needs.

Define Wire Identification

Label each wire with its corresponding location ID number for clarity.

Organize Wiring for Termination

Separate voice and data wires for efficient termination in the panel.

INSTALLATION PROCEDURE

Twist & Mount Patch Panel Installation

Mount the panel with IDCs facing out, aligning hooks for secure fit.

Cable Termination Process

Wire Termination Steps

Run cables, strip jacket, and match wire colors to IDC termination diagram.

Using Termination Tools

Utilize plastic tool or professional punch tool for wire termination.

Panel Mounting Steps

Secure Panel Mounting

Release hooks, twist panel, align pins, and press into enclosure to secure.

LABELING THE PANEL

Wiring Identification Chart Usage

Reference chart to label jacks with location and service type.

Technical Support and Warranty

Limited 2 Year Warranty Details

Details warranty exclusions and limitations for product defects.

Technical Assistance Contact

Contact information for technical support.