Leviton DDS6000 User Manual

NSI DIGITAL DIMMING SYSTEM
DDS 6000 DIMMER PACK
INSTALLATION AND OPERATION GUIDE
Software Revision 1.0 and above, Version C, UL Versions
INTRODUCTION
The NSI DDS 6000 represents a key part of a state of the art, integrated lighting control system. These dimmers may operate in
a "stand alone" mode for automated lighting of displays or may be combined with an NSI memory lighting console for total lighting
control. The DDS 6000 provides four channels of 1200 watts each. This dimmer is designed for portable or permanent use for
entertainment or display lighting. Several DDS dimmer packs may be combined for more channels of lighting.
SPECIFICATIONS
Number of Channels: 4
Output capacity: 1200 Watts per channel.
Input Power: DDS 6000-15: 120 VAC 1800 Watts max (one power source)
DDS 6000-20: 120 VAC 2400 Watts max (one power source)
DDS 6000Plus-15: 120 VAC 3600 Watts max (two power sources)
DDS 6000Plus-20: 120 VAC 4800 Watts max (two power sources)
Dimmer control system: Microprocessor digital phase control dimming or
zero-crossing relay mode.
Load filtering: ~ 400us rise time.
Control Input Types: 0 - 10VDC each channel on 5 pin Din connector.
MICROPLEX multiplex signal (128 channel)
on three pin XLR type connector.
DMX-512 digital signal (512 channel) on five pin XLR optional.
Control Wiring: Class 2 low voltage.
Output Connections: 2 NEMA 5-15 outlets per channel.
Screw terminals optional
Cooling System: Passive external aluminum heatsinks.
Ambient Temperature: 100 degree F Maximum.
Load Type: AC lighting loads only
Enclosure Type: For indoor use only, (Utilizer dans un endroit a l’abri.)
DDS 6000 DIMMER PACK
Software Revision 1.0 and above, Version C, UL Versions INTRODUCTION
NSI CORPORATION 1

Leviton DDS6000 Specifications

General

Brand	Leviton
Model	DDS6000
Category	Dimmer
Language	English

Summary

Specifications

Mounting

AC Power Cable and Output Receptacles

Details power cords, capacity limits, and output receptacles per channel.

Permanent Connection

AC Input and Output Wiring

Describes conduit entry, wire sizes, and termination for permanent AC input/output.

Control Wiring Methods

Covers Microplex and Analog 0-10 VDC control wiring protocols and connections.

DMX-512 Control and Indicators

DMX-512 Control Wiring

Details DMX-512 digital control, its benefits, and daisy-chaining.

LED Indicators and Auto Lamp Test

Explains front panel LED status lights and the Auto Lamp Test function.

Fuses and Installation Tips

Channel Fuses

Explains the function of channel fuses and proper replacement.

Installation and Operation Tips

Provides advice on wiring separation and phased power-up for optimal installation.

Front Panel DIP Switch Settings

DIP Switch Channel Assignments

Lists the dip switch settings for assigning dimmer channels.

Internal Configuration Dipswitch Selections

Softstart

Explains the Softstart mode for gradual lamp warming and its activation.

Non Dim Channels (Relay Mode)

Describes configuring channels for Non Dim (Relay) operation.

Auto Sequencing Mode

Sequence Patterns and Timing

Details front panel dipswitch settings for auto sequencing patterns and times.