8
Check your wall box:
WARNING: TO AVOID FIRE, SHOCK OR DEATH, turn off power at
the circuit breaker.
1. Remove wallplate and disconnect switch.
2. Ensure disconnected wires are not touching.
3. Restore power. Carefully test wires with voltage tester to find
the hot wire.
4. Turn off power at the circuit breaker.
5. Mark the following wires:
Identify your wires
If your wall box looks different,
consult an electrician.
two or
more white
(neutral) wires
a hot (line) wire
(find with voltage tester)
a load wire
a copper ground
NEUTRAL
LINE
LOAD
GROUND
To Next Page
Loading...
