Need help?Do you have a question about the Leviton i Series e and is the answer not in the manual?
Describes the violet i Light indicator status and its meaning for the rack's operation.
Details the status indicators for i Series e and i Series Quad dimmer modules.
Explains the normal LED boot sequence for the control module.
Describes the Phase A, B, & C LED indicators for rack power feed status.
Explains the function of the Over Temp LED on the control module.
Details the LEDs indicating DMX and Analog control source status.
Lists abnormal LED conditions and their corresponding diagnostic meanings for the control module.
Procedure to record and activate the panic scene using Remembrance Panic/Entry stations.
Procedure to record and activate analog scenes using Remembrance Analog Stations.
Procedure for recording and playing backup looks using a Hand Held Remote.
Details purposes of HHT in Local Mode: Rack Config, Dimmer Config, Status.
Details purposes of HHT in Remote Mode: Recording/Playing backup looks.
Explains the initial help screens and softkey conventions for the HHT.
Procedure to test HHT configuration using the diagnostic LED.
Guides through the main local menu, its values, and their meanings.
Shows global settings like rack number, control module, and voltage system.
Configures DMX hold time and line regulation for power fluctuation compensation.
Details settings for max/min levels, non-dim cutoff, and fluorescent ballast cutoff.
Shows and configures start addresses for DMX512 and Luma-Net input sources.
Procedure to enter configuration mode and navigate its menus.
Procedures for changing password and restoring factory default settings.
Explains how to access help screens for rack configuration parameters.
Describes the Dimmer View Menu, its fields, and dimmer slot numbering.
Explains how control sources (DMX, LUM, Analog, Panic, Backup) are displayed.
Details interpretation of dimmer levels, sources, and indicators like Luma-Net feedback.
Guides on setting max/min levels, dimmer curves, and DMX/Luma-Net patching.
Procedure to force a dimmer to a specific level for testing or control.
Procedure for editing individual dimmer profiles, including curves and settings.
Details specific dimmer curves (MARK10, HILUME) and Luma-Net feedback control.
Step-by-step guide to create custom DMX and Luma-Net patches.
Explains the meaning of status indicators like OK, EMERGENCY, and OVERTEMP.
Details HHT connection to remote port, pinout, and daisy-chaining for backup looks.
Procedure to record scenes into backup looks using the HHT in remote mode.
Procedure to select and play back recorded backup looks with crossfading controls.
Instructions for cleaning dust from air filters, vents, grilles, and intake openings.
Procedure for checking wire termination tightness every six months.
Details rack capacity, physical dimensions, and weight for different configurations.
Covers fan noise, temperature, humidity, feeder size, input voltage, and frequency.
Details specifications for Belden cables 9829 and 9830 used with the system.
Outlines product warranty period, coverage, exclusions, and registration requirements.
Details the procedure for product returns and provides contact information.
To Next Page
General