16
Quick tips
If your controller is not performing as expected, visit
leviton.com/decorasmart or contact technical services.
• Fan turns on but does not run as fast as is should:
- Use the fan speed bar to select 100%.
- If the fan has a pull chain or similar speed control, ensure
it is at 100% and use only the Decora Smart fan speed
controller to set the fan's speed.
• Intermittent operation:
- Confirm the load does not exceed ratings.
- Confirm that a neutral is connected.
Status light
COLOR ACTIVITY STATUS
Green Slow blink Ready to be added to a Wi-Fi network
Green Flash Connecting to a Wi-Fi network
Green or O Solid Normal operation, can be configured
in setup
Amber Blinking Device was not able to connect to the
Wi-Fi network
Green, Red,
Amber
Scrolling Enrolling to My Leviton or identify feature
was triggered in the app
Please see My.Leviton.com support for additional diagnostic assistance
To Next Page
Loading...
