Need help?Do you have a question about the Leviton VerifEye 7100 Series and is the answer not in the manual?
General| Model | 7100 Series |
|---|---|
| Category | Measuring Instruments |
| Manufacturer | Leviton |
| Product Line | VerifEye |
| Frequency | 50/60 Hz |
| Display | LCD |
| Communication | Modbus |
Instructions for installing the S7 Configuration Utilities software.
Steps to connect the VerifEye meter to a PC via USB for power and communication.
Explains how to establish network connections using Ethernet.
Overview of the S7 Configuration Utilities software features and interface.
Step-by-step guide to configure electrical components like service type and CTs.
How to configure RS-485 communication settings for Modbus or BACnet.
Steps to configure Ethernet communication settings for Modbus or BACnet.
How to set up user-configurable alarms for over/under voltage and current.
How to retrieve logged energy data from the meter's internal memory.
Step-by-step guide for installing the enclosure model of the VerifEye meter.
Detailed wiring diagram and instructions for split phase service panels.
Detailed wiring diagram and instructions for 3-phase, 4-wire service panels.
Essential criteria and information about current transformers (CTs).
Guides on how to connect CTs to the VerifEye meter for different service types.
How to verify communication settings using the LCD interface or software.
Configuration settings for Modbus RTU and Modbus TCP protocols.
Configuration settings for BACnet MS/TP and BACnet IP protocols.
How to configure user-adjustable alarms for voltage and current conditions.
Performing checks to ensure CTs are correctly phased and oriented.
How to configure registers for various service types (e.g., 4-Wire, 3-Phase Wye).
To Next Page
