Need help?Do you have a question about the Leviton Series 2000 and is the answer not in the manual?
General| Brand | Leviton |
|---|---|
| Model | Series 2000 |
| Category | Measuring Instruments |
| Language | English |
Leviton Series 1000 and 2000 meters are self-powered, CT-rated electronic kWh meters for permanent connection to electrical service.
Describes revenue-grade accuracy, use with CTs, LCD display, AMR compatibility, and reverse-phase diagnostic indicator.
Lists UL listing, ANSI C12.10 compliance, and California CTEP approval for Series 2000.
Details the two available enclosures: industrial grade JIC steel and plastic NEMA 4X.
Provides input configurations, voltage/current ratings, frequency, power factor, accuracy, operating temperatures, and humidity.
Shows the terminal layout for Series 1000 and 2000 meters and refers to section 3 for hookup diagrams.
Details general display information, including active energy, instantaneous and peak demand readings, and peak demand reset functionality.
Explains the meaning of warning symbols used in the manual: consult manual, electric shock hazard, and double insulation.
Provides critical safety warnings regarding hazardous voltages, power disconnection, bonding, and adherence to codes.
Steps to prepare for installation: verify model, consult codes, check conduit, tools, and inspect the meter/panel.
Lists required materials: meter, enclosure, wires, CTs, and conduit/fittings.
Instructions for mounting the enclosure, including selecting a location and considering disconnect devices.
Details connecting voltage and neutral wires, routing through conduit, trimming, stripping, and tightening wires.
Covers general requirements for CT installation, including splices, lead stripping, securing CTs, and phase orientation.
Covers testing voltage, the reverse phase indicator LED, load LEDs, and the LCD display after installation.
Instructions on how to secure the enclosure using the provided key lock for safety.
To Next Page
