Need help?Do you have a question about the Leviton 2000 Series and is the answer not in the manual?
General| Brand | Leviton |
|---|---|
| Model | 2000 Series |
| Category | Measuring Instruments |
| Language | English |
Describes the Leviton Series 2000 Meter as a self-powered, CT-rated electronic kWh meter for electrical service.
Lists key features like revenue-grade accuracy, LCD display, expansion slots, multiple load monitoring, AMR compatibility, and warranty.
States UL Recognized Component status for US/Canada and ANSI C12.10 accuracy compliance.
Details the physical aspects of the MMUs, focusing on enclosure sizes and capacity.
Describes the three enclosure sizes (small, medium, large) and their meter capacities.
Provides detailed electrical parameters including voltage, power, frequency, accuracy, and temperature ratings.
Details terminal configurations for voltage, CT inputs, and isolated outputs, including diagrams.
Describes the LCD display capabilities for total energy, instantaneous demand, and peak demand.
Explains the procedure for resetting the stored peak demand using the key switch.
Explains the meaning of symbols indicating potential risks and electric shock hazards.
Outlines essential safety measures for installing electric meters, including power disconnections and qualified personnel.
Covers verification of specifications, local codes, conduit suitability, and tool checks before installation.
Lists necessary components for installation, including MMU, wires, and current transformers.
Provides guidance on selecting a mounting location and making conduit openings for the enclosure.
Recommends mounting near the disconnecting device with adequate ventilation and considering lead lengths.
Details steps for fastening the enclosure and ensuring secure connections and conduit fittings.
Covers connecting voltage lines and neutral, routing wires, and proper stripping and tightening for terminals.
Explains CT installation requirements, including wire stripping, fastening, and orientation for accuracy.
Describes testing procedures for voltage, CT reverse phase indicator LED, load LEDs, and LCD display.
Details the process for installing an additional meter into MMUs with expansion slots.
To Next Page
