5
5
What you need
to make it work:
RATINGS
General Use 15A - 120VAC, 50/60Hz
M
agnetic 15A - 120VAC, 50/60Hz
LED/CFL 5A - 120VAC, 50/60Hz
Incandescent 1500W - 120VAC, 50/60Hz
Motor 3/4 HP - 120VAC, 50/60Hz
Operating Temp 0°C - 40°C (32°F - 104°F)
Operating Humidity 0-90% non-condensing
NETWORK
Z-Wave Plus 908.42 MHz
To install and use your Z-Wave enabled outlet.
1. A Z-Wave compatible hub.
2. A Z-Wave mesh network to join within 30 feet of
installation location.
3. An available interior wallbox with a hot, neutral,
and ground wire.
WARNING: Do not use with aluminum wire.
To ensure proper communication do not use with
metal wallplates.
4. Compatible with outlet loads up to 15A.
GROUND
LINE
NEUTRAL
To Next Page
Loading...
