13
Additional Supported
Z-Wave Classes
In addition to the standard Z-Wave Commands, your outlet supports:
Z-WAVE PLUS INFO ASSOCIATION
ASSOCIATION GRP INFO S2 SECURITY
S0 SECURITY VERSION
MANUFACTURER SPECIFIC CONFIGURATION
DEVICE RESET LOCALLY POWERLEVEL
SWITCH BINARY BASIC
SCENE ACTUATOR CONF SCENE ACTIVATION
TRANSPORT SERVICE FIRMWARE UPDATE MD
SUPERVISION INDICATOR
MULTI CHANNEL ASSOCIATION
Z-Wave Supported Associations
Your outlet supports the following associations:
Group Number: 1
• Maximum Nodes: 5
• Name: Lifeline
• Profile: 0x0001
• Command Class: 0x5A01, 0x2503 and Ox8703
Advanced Options
Leviton Decora Smart branded products are configurable over the
Z-Wave network. Compatible Z-Wave controllers can add support for
additional advanced options. Consult your Z-Wave controller manufacturer
for compatibility with advanced feature support.
Status LED Configuration
• Parameter No: 7, Length: 1 Byte
• Valid Values = 0 to 255 (default 255)
0 = LED O
254 = Status Mode
255 = Locater Mode
To Next Page
Loading...
