Routine Infusion Instructions
11
6. Press the *blinking* CYCLE button to
select INFUSE. If you plan to DRY or
ACTIVATE before infusing, skip to page 13!
LEVO will automatically suggest a default
time and temperature for the INFUSE cycle.
You can adjust the time (up to 10 hours) and
temperature (up to 200°F/93°C) settings, as
needed, by pressing the + and - buttons.
Once you’re happy with your settings, press
START. Use our handy Time & Temperature
Calculator on our website or mobile app for
recommendations on suggested infusion
settings.
7. LEVO will automatically engage the safety
lock when the infusion cycle starts. If
needed, you can unlock the lid at anytime
during the cycle by pressing the LOCK
button and pressing down on the lid to
open, pausing your infusion. Closing the lid
and pressing START will continue
your infusion.
Warming Up
Note that the time it takes LEVO to reach your set
temperature can vary depending on factors like altitude,
your cycle settings, and the type of ingredients you're
using. Allow a range of approximately 15-30 minutes to
reach your set cycle temperature.
To Next Page
Loading...
Need help?
General
