Routine Infusion Instructions
8. Your LEVO will display WARMING UP as it
preheats to your desired temperature and then
alert you with a sound when the preset
temperature has been reached. During the cycle,
the display will show the REMAINING TIME and
CURRENT TEMPERATURE.
9. Your LEVO will alert you with a sound when the
timer is up and your infusion is complete. The
display will read INFUSION COMPLETE. Note that
you can change time and temperature or
manually end your cycle at any time.
10. Now, you’re ready to dispense your infusion!
Place your container of choice on the mirrored
surface under the dispenser and press and hold
the DISPENSE button to drain. Allow the infusion
to cool for 5–10 minutes before handling.
11. Turn off and clean your LEVO after each use.
NOTE: You must fully dispense your
batch before removing the reservoir
for cleaning!
The reservoir nozzle is held in place by a
pinch valve; the release button opens the
valve allowing you to remove your reservoir
with ease.
12
To Next Page
Loading...