Levo II User Manual

Don’t forget! You can control
your LEVO remotely through the
LEVO app!
Routine Infusion Instructions
10
1. Press POWER to turn on. The LEVO should be
set on a flat surface and stay put for the
remainder of the process.
2. Open the lid by pressing down on it gently
to release the latch and double - check that
the reservoir is properly nested inside your
LEVO (See “Getting Started” on page 8).
3. Remove your Herb Pod from the reservoir
and add your ingredients. Make sure to not
pack it too tightly, so that liquid can freely flow
in and out. With the silicone cap securely on,
place your packed Herb Pod in the designated
spot in your reservoir (where it says PLACE
POD HERE).
4. Place the magnetic stirrer on the center
mark inside the reservoir (paddle side up).
5. Add in 5 –19 fl oz (150 mL–550 mL) of oil or
butter to the reservoir, making sure the
contents of your Herb Pod are completely
submerged in liquid.

Levo II Specifications

General

Type	Herbal Infuser
Infusion Cycles	Dry, Activate, Infuse
Control	Digital touchscreen
Power	110V
Timer	Yes
Capacity	16 oz
Dishwasher Safe Parts	Yes
Material	Plastic
Warranty	1 year