Levoit Classic 200S - Reassembly and Storage

18
Storing
Reassembling
1. Flip the water tank over and replace the
noise silencer on the tank. [Figure 4.15]
2. Refill the tank, if necessary. Replace the
water tank cap by firmly twisting it back
in place, aligning the arrow with the
lock. [Figure 4.16]
Figure 4.15
Figure 4.17
Figure 4.18
3. Store the brush in the brush storage
slots in the base. [Figure 4.17]
Figure 4.16
4. Place the tank properly on the base and
replace the nozzle cover onto the water
tank. [Figure 4.18]
Follow the cleaning instructions (see page
14) and allow all parts to dry completely
before storing. Store in a cool, dry location.