9
USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier.
2. Tap to turn your humidifier on.
Tap repeatedly to cycle through mist
settings: Auto Mode, Low, Medium,
High, and O. [Figure 3.1]
3. Rotate the nozzles to adjust the
direction of the mist. [Figure 3.2]
4. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting or turn it o.
A healthy humidity level is between 40%
and 50%. [Figure 3.3]
5. Press and hold for 2 seconds to turn
your humidifier o.
Figure 3.1
Figure 3.2
Figure 3.3
Note:
• If there is no water in the tank or the tank is
removed, the humidifier will stop misting,
will turn red, and the fan will turn o after 5
seconds.
• When the tank is empty or removed,
you can tap
or to turn the
humidifier o.
• Refill the tank and properly place it on
the base to use your humidifier.
• To restart the humidifier, tap
as normal. You can also turn the
humidifier back on in the app, which
will remember your previous mist level
setting.
• To reset the humidifier, press and hold for
15 seconds. This will restore the humidifier’s
default settings and disconnect it from the
VeSync app.
Note: Using the VeSync app allows you to control
your smart humidifier remotely and access additional
functions and features (see page 11).
Note: For more information on Auto Mode, see
page 10.
To Next Page
Loading...
Need help?
General
