10
Filling & Refilling
Figure 1.4 Figure 1.5
Figure 1.3
Figure 1.6
Note:
Make sure the water tank is clean before
filling.
1. Remove the top cover.
[Figure 1.4
]
2. Use a pitcher or bottle to fill the water
inlet tank with room-temperature water.
You can also add water directly to the
water tank. [
Figure 1.5
]
7. Mist should be directed away from walls,
furniture, bedding, and appliances.
[
Figure 1.3
]. Avoid letting too much mist
fall on the side of the humidifier with the
aroma box, as this may interfere with the
sensor inside the aroma box.
Note:
• We recommend using purified or distilled
water to fill the tank.
• Do not fill with hot water.
•
Using tap water may result in a white dust
(dried minerals) on surfaces.
3. Use the water level window to see how
much of the tank is filled. Do not fill past
the max line or water may overflow out
of the vents in the handles.
4. Replace the top cover. [
Figure 1.6
]
GETTING STARTED (CONT.)
Figure 1.7
• Do not remove the water inlet tank
during filling.
• Only add water into the water inlet tank
or water tank. Do not add water directly
into the base chamber or mist tube.
• Do not add essential oils into the
humidifier. Only add essential oils to the
aroma pad. [
Figure 1.7
]
CAUTION
• Do not use water treatment liquids or
third-party water filters in this humidifier.
To Next Page
Loading...
