Levoit OasisMist 1000S - Important Operational Tips

15
VeSync App Functions
Important Tips
Your humidifier must have the correct level
of water in the base chamber to work
properly. If there is too much water in the
base chamber, the humidifier cannot create
mist.
The VeSync app allows you to access
additional smart functions, including those
listed below.
Note: The VeSync app is continually updated
and app features will expand.
• Do not place the humidifier on an
inclined surface.
• Do not add water directly into the
base chamber or mist tube. Only
add water to the water inlet tank
or directly into the water tank. The
humidifier will automatically deliver
the correct amount of water into the
base chamber.
• Do not remove the water inlet tank
during filling.
Remote Control From Your Phone
• Turn the humidifier on/o.
• Cycle through mist levels.
• Turn Auto Mode on/o.
• Set a target humidity level.
• Turn Sleep Mode on/o.
• Turn the display lights on/o.
Monitor Humidity Levels
• Check current humidity levels in the
humidifier’s environment.
Set Timers & Schedules
• Program individual timers or create a
schedule for your smart humidifier.
Third-Party Voice Control
• Compatible with Amazon Alexa and
Google Assistant™ for voice commands.
Figure 4.1
• Avoid moving or shaking the
humidifier. [ Figure 4.1 ] This may
cause the water tank pump to
deliver too much water into the base
chamber or reduce the amount of
water in the base chamber.
• Before moving the humidifier, turn it
o and unplug it.