14
VeSync App Functions
Automatic Shutoff Important Tips
The humidifier will automatically turn o
when all of the water in the tank has been
diused. will show on the display and
blink 10 times before the humidifier turns
o. Fill the water tank (see Getting Started,
page 8).
If the tank has been removed from the
base, the humidifier will automatically stop
misting. will show on the display and
will turn o once the tank is placed properly
back on the base.
Your humidifier must have the correct level
of water in the base chamber to work
properly. If there is too much water in the
base chamber, the humidifier cannot create
mist.
The VeSync app allows you to access
additional smart functions, including those
listed below.
Note:
The VeSync app is continually updated
and app features will expand.
• Do not place the humidifier on an
inclined surface.
• Never pour water directly into the
base chamber. [
Figure 5.1
] Only
add water to the water tank. The
humidifier will automatically release
the correct amount of water into the
base chamber.
Remote Control From Your Phone
• Turn the humidifier on/o.
• Cycle through mist levels and heat
levels.
• Turn Auto Mode on/o and set target
humidity level.
• Turn Sleep Mode on/o.
• Turn the display lights on/o.
Monitor Humidity Levels
• Check current humidity levels in the
humidifier’s environment.
Set Timers & Schedules
• Program individual timers or create a
schedule for your smart humidifier.
Third-Party Voice Control
• Compatible with Amazon Alexa and
Google Assistant™ for voice commands.
Figure 5.1
Figure 5.2
• Avoid moving or shaking the
humidifier. [
Figure 5.2
] This may
cause the water tank to release too
much water into the base chamber.
• Before moving the humidifier, turn it
o, unplug it, and remove the water
tank. Empty any excess water from
the base chamber.
To Next Page
Loading...
