Levoit True HEPA Core 300 User Manual

14
1. Unplug the air purifier. Flip the air purifier
over and remove the filter cover (see
Getting Started, page 7).
2. Remove the old filter.
3. Clean out any remaining dust or hair inside
the purifier using a vacuum hose. Do not
use water or liquids to clean the purifier.
[Figure 3.2]
4. Unwrap the new filter and place it into the
housing (see Getting Started, page 7).
5. Replace the filter cover. The air purifier will
not power on unless the cover is replaced
correctly.
6. Plug in and turn on the air purifier.
7. Reset the Check Filter Indicator
(see page 13).
Replacing the Filter
Figure 3.2
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
Storage
CARE & MAINTENANCE (CONT.)
The filter should be replaced every 6–8
months. You may need to replace your filter
earlier or later depending on how often you
use your air purifier. Using your air purifier in
an environment with relatively high pollution
may mean you will need to replace the filter
more often, even if is o.
You may need to replace your filter if you
notice:
• Increased noise when the air purifier is on
• Decreased airflow
• Unusual odors
• A visibly clogged filter
When Should I Replace the
Filter?
Note:
• To maintain the performance of your air
purier, only use ocial Levoit lters.
For more information, contact Customer
Support (see page 19).
• Remember to reset after changing
the lter.

Levoit True HEPA Core 300 Specifications

General

Brand	Levoit
Model	True HEPA Core 300
Category	Air Cleaner
Language	English