8
Sleep Mode
Sleep Mode operates quietly by using the
lowest possible fan speed.
Tap
to turn Sleep Mode on/o.
Timer
You can set a timer for 2, 4, or 8 hours.
1. Tap
repeatedly to select a time.
USING YOUR PURIFIER (CONT.)
Night Light
Use 1 of 2 brightness levels.
1. Tap once to turn on the light.
2. Tap a second time to dim the brightness
to half.
3. Tap a third time to turn o the light.
Note:
• You can change the fan speed at any
time while the timer is on.
• The timer will restart if it is changed.
Note:
• The night light can be used any time the air
purifier is plugged in, even if it is not on.
• The night light will remain on, even if you
turn the display o.
ABOUT THE FILTER
The air purifier uses a 3-stage filtration
system to purify air.
A. Nylon Pre-Filter
• Captures large particles such as dust,
lint, fibers, hair, and pet fur.
• Maximizes the filter’s life.
B. True HEPA Filter
• Removes at least 99.97% of airborne
particles 0.3 micrometers (µm) in
diameter.
• Filters small particles such as smoke,
tiny dust particles, mold spores,
bacteria, viruses, and allergens such
as pollen, dander, and mites.
C. High-Eciency Activated Carbon Filter
• Physically absorbs unwanted odors
and fumes.
• Filters compounds such as
formaldehyde, benzene, ammonia,
hydrogen sulfide, and volatile organic
compounds (VOCs).
A
B
C
2. The air purifier will automatically power
o once the timer is finished.
3. To cancel a timer, tap
until all timer
indicators are o.
Note:
• The indicators are not buttons and
cannot be used to select a time.
• The timer indicators will light up blue
when activated.
Note:
• All indicators lower their brightness by
⅓ when Sleep Mode is on.
• Tapping will exit Sleep Mode.
To Next Page
Loading...
