Levoit Vital 100 Series - Using Your Air Purifier; General Operation; Memory Function

8
USING YOUR AIR PURIFIER
1. Plug in and tap to turn the air purifier
on/o. The fan will start on level I.
2. Optionally, tap to cycle fan speeds
between I, II, and III.
General Operation
Note:
• The indicators are not buttons and
cannot be used to change the
fanspeed.
• The fan speed indicators will light up
when active.
• Fan speed III is the loudest, but cleans
air the quickest.
• For best results, or to address a
specific air quality issue such as
smoke, run the air purifier at high
speed (level III) for 15–20 minutes
before using a lower speed.
• To eectively clean air, keep windows
and doors closed while the air purifier
is on.
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
Note: The air purifier will not remember timers.
Timer
You can set a timer for 2, 4, or 8 hours.
1. Tap repeatedly to select a time. The
timer will start automatically.
Note:
• The indicators are not buttons and
cannot be used to select a time.
• The timer indicators will light up blue
when active.
2. Once the timer has finished, the air
purifier will turn o.
3. To cancel a timer, tap until all timer
indicators are o.
Note:
• You can change the fan speed at any
time while the timer is on.
• The timer will restart if the time
is changed.