11
USING YOUR SMART AIR PURIFIER (CONT.)
Timer
You can manually set the timer for 2, 4, or 8
hours using the button. You can also set
the timer for 1–24 hours through the VeSync
app.
1. Tap repeatedly to select a time. The
timer will start automatically.
Note:
• The indicators are not buttons and
cannot be used to select a time.
• The timer indicators will light up blue
when active.
• When the timer is set through the
VeSync app, the indicator will light
up instead. Once the timer has finished,
the air purifier will turn o.
Note:
• You can change the fan speed at any
time while the timer is on.
• The timer will restart if the time is
changed.
2. To cancel the timer, tap until all timer
indicators are o. You can also turn the
timer o in the VeSync app.
Light Detection
1. The light sensor is o by default. You
can turn on/o Light Detection in the
Vesync APP. You can also press and hold
display button for 3 seconds to turn on/
o Light Detection, and the air quality
indicator blinks once when the operation
is complete.
2. While the air purifier is operating, the
Light sensor will detect the brightness
of the room and work according to the
ambient light.
Note:
• When the light detection on and room
is in darkness, if the air purifier is in
Auto Mode or Pet Mode, it will not use
the high or turbo fan speed to avoid
making too much noise.
• When the room becomes light again,
the air purifier will return to its previous
setting. The display will automatically
turn back on.
• With the light detection on, if you click
display o, the screen will stay o;
however, you can’t get the screen to
stay on in a dark room.
Room light Display
Dark
Display o
Light Display on
To Next Page
Loading...
