MODEL ROPE
MOTOR
SUPPLY
MOTOR
POWER MAXIMUM PULL
WORKING
LOAD LIMIT
NORMAL
CURRENT
DRAW
CIRCUIT
BREAKER WEIGHT
mm in Voltage Watt kg lb kg lb Amp Amp kg lb
S900 12-16 ½” - ⅝” 12 600 409 900 102 225 85 90 11.6 26
S2000 12-16 ½” - ⅝” 12 1000 910 2000 228 500 100 110 19.9 44
2
1- Introduction
Thank you for choosing Lewmar. Lewmar products are world renowned for their quality, technical innovation and
proven performance. With a Lewmar product you will be provided with many years of outstanding service.
Product support
Lewmar products are supported by a worldwide network of distributors and Authorised Service Representatives.
If you encounter any difficulties with this product, please contact your national distributor, or your local Lewmar
dealer. Details are available at: www.lewmar.com
CE Approvals
For CE approval certificates contact Lewmar.
Important information about this manual
Throughout this manual, you will see safety and product damage warnings.
You must follow these warnings carefully to avoid possible injury or damage.
2- Specification
2.1 Electric specifications
2.2 Gypsy specifications
Specifcally designed gypsy to suit leaded lines 12 to 16mm diameter.
To Next Page
Loading...
