EasyManuals Logo

Lexicon ALEX - REV 1 User Manual

Lexicon ALEX - REV 1
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
To make sure you get the most out of
Alex, be sure to read the manual.
Introduction
1
Thank you for your purchase of Alex,
Lexicon's Digital Effects Processor.
Alex gives you world class reverberation
and effects to enhance any audio perfor-
mance. Sixteen preset effects provide a wide
range of superb sounds right out of the box.
Three adjustable parameters allow you to
make subtle or dramatic changes to each
preset, and a bank of 16 registers is available
for storing your own customized effects.
Footswitch control allows you to set up reg-
ister loops and chains to suit your perfor-
mance needs.
Some of the exciting features of Alex are:
16 presets, each with 3 adjustable param-
eters
4096 possible effect variations
Full-rack size with large LED display of
currently running effect
and
parameter
settings
16 registers where you can store your own
customized effects
Edit compare of a preset and your modifi-
cations
Footswitch control of bypass (input mut-
ing), register loading and register chains
Stereo Inputs and Outputs
Easy operation

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexicon ALEX - REV 1 and is the answer not in the manual?

Lexicon ALEX - REV 1 Specifications

Audio IconAudio
audio input level-30 dBu minimum
audio input impedance (stereo)50 kΩ unbalanced
audio input impedance (mono)25 kΩ unbalanced
audio output level (nominal)-2 dBu
audio output level (maximum)+8 dBu
audio output impedance600 Ω unbalanced
Frequency Response and THD+N IconFrequency Response and THD+N
frequency response (wet)20 Hz - 15 kHz, +1 dB to -3 dB
frequency response (dry)20 Hz - 20 kHz, +0.5 dB
THD+N (wet)<0.05% @ 1 kHz
THD+N (dry)<0.025% @ 1 kHz
Dynamic Range and Conversion IconDynamic Range and Conversion
dynamic range85 dB, typical, 20 Hz - 20 kHz bandwidth
conversion16 bit linear PCM encoding
sampling rate31.25 kHz
Power IconPower
power requirements9 VAC, 1 A wall transformer provided
Operating Environment IconOperating Environment
operating temperature32° to 104°F (0° to 40°C)
storage temperature-20° to 170° F (-30° to 75°C)
relative humidity95% non-condensing
Weight and Dimensions IconWeight and Dimensions
dimensions19"W x 1.75"H x 4"D (483 x 45 x 102 mm)
weight2 lbs 11 oz (1.22 kg)

Related product manuals