31
DC-2 Digital Controller
System
Configuration
This control allows you to adjust the left/right balance of the front, side and
rear main outputs. This control can also be accessed on the remote by
pressing and holding the Shift button and using DONE to move to the left,
and SELECT to move to the right.
This control allows you to adjust the left/right balance of the Zone 2
outputs. This control can also be accessed on the remote by pressing and
holding the Record/Zone 2 button and using DONE to move to the left, and
SELECT to move to the right.
L/R Balance
Zone 2 Balance
To Next Page
Loading...
Need help?
General
