Need help?Do you have a question about the Lexicon JAM MAN and is the answer not in the manual?
Audio Inputs and Outputs| audio input level | -30 dBu minimum |
|---|---|
| audio input impedance stereo | 50 kΩ unbalanced |
| audio input impedance mono | 25 kΩ unbalanced |
| audio output level | -2 dBu nominal |
| audio output impedance | 60 Ω unbalanced |
Frequency and Distortion| frequency response wet | 20 Hz - 15 kHz, +1 dB to -3 dB |
|---|---|
| frequency response dry | 20 Hz - 20 kHz, +0.5 dB |
| THD+N wet | <0.05% @ 1 kHz |
| THD+N dry | <0.025% @ 1 kHz |
| dynamic range | 85 dB typical, 20 Hz - 20 kHz bandwidth |
Power| power requirements | 9 VAC, 1 A wall transformer provided |
|---|
Operating Environment| operating temperature | 32° to 104°F (0° to 40°C) |
|---|---|
| storage temperature | -30° to 75°C |
| relative humidity | 95% non-condensing |
Weight and Dimensions| dimensions | 19" W x 1.75" H x 4" D (483 x 45 x 102 mm) |
|---|---|
| unit weight | 2 lbs, 12 oz (6.1 kg) |
| footswitch weight | 8.5 oz (1.2 kg) |
Procedure for checking the unit and packing materials upon receipt.
Comprehensive guide to using the Echo mode for delay effects and rhythmic variations.
Comprehensive guide to capturing, playing, and triggering audio samples.
Comprehensive guide to creating, layering, and managing audio loops.
Creating and managing single and multiple loops.
Using JamMan to control the tempo of connected drum machines or sequencers.
Step-by-step instructions for safely installing memory upgrade ICs.
To Next Page
