Lexicon JAM MAN - Echo Mode Operations

Echo Mode
With JamMan on, and an audio source
connected,
1. Turn the Mode knob to
ECHO.
2. Set the front panel MIX control halfway
between DRY and WET .
7
Set Mode knob to ECHO .
With JamMan, you no longer have to
struggle with calculations of appropriate de-
lay times to create rhythmic echoes when
you play. Now, you can tap a tempo, and
JamMan will sync to you.
ECHO mode allows you to tap in a delay
time in whatever tempo you want. Simply
press TAP twice in rhythm to establish the
tempo you want — the TEMPO LED on the
front panel will start blinking at the echo rate
you’ve set. Sixteen levels of feedback con-
trol (echo regeneration) are provided
through the front-panel SELECT knob, or via
footswitch.
Once you’ve tapped in the basic rhythm
(for example, quarter-notes), pressing
FUNCTION allows you to split the echo rate
into eighth-note, triplet, or sixteenth-note
echo rates, or to keep it in the basic quarter-
note rhythm — the echo rate will always fit
musically with the tempo you’ve established.
Changing tempos is as easy as tapping in a
different rhythm.
Pressing RESET/BYPASS mutes the
echo effect.
PUNCH IN
LOOP
PHRASED
LOOP
3
4
6
8
12
16
24
MIDI
ECHO
SAMPLE
3
4
6
8
12
16
24
MIDI