DISPLAY
+ = Inactive in this mode
- = Inactive in this mode
1-16 = Feedback level (default = 1)
• = Inactive in this mode
RESET/BYPASS
Activates and deactivates wet audio
bypass. Causes a “P” to appear in the
display when active.
SELECT
Selects feedback level. (Display levels
1-16 correspond to 0-100% feedback.)
8
LED blinks at the current echo rate. When a new rate is
tapped in, the LED lights solid on the first tap,then blinks
at the new echo rate on the second tap. (If no second tap
is received, echo rate will automatically be set to the
maximum available memory.)
MUTE/
LAYER/
REPLACE/
FUNCTIONRESET/BYPASS
SELECT
TEMPO
TAP
TAP
Press twice in rhythm to set
echo rate.
FUNCTION
Selects between tapped rhythm
and three rhythmic variations (your
tempo divided by 2, 3 or 4.)
LEDs show the currently selected
echo rhythm
(selected by FUNCTION).
Basic Echo
To Next Page
Loading...