Lexicon JAM MAN - Sample Mode Operations

Sample Mode
Set Mode knob to SAMPLE .
With JamMan on, and an audio source
connected,
1. Turn the Mode knob to SAMPLE.
2. Set the front panel MIX control halfway
between DRY and WET.
SAMPLE
mode allows you to capture a
single sample of as long as 8 seconds (32
seconds with memory upgrade).
Once a sample is recorded, you can set it
to play forward or backward. — You can
even change direction as many times as you
like during playback. You can trigger play
manually (or via footswitch), or set it to play
in response to one of fifteen levels of audio
threshold.
11
PUNCH IN
LOOP
PHRASED
LOOP
3
4
6
8
12
16
24
MIDI
ECHO
SAMPLE
3
4
6
8
12
16
24
MIDI