Lexicon MC-12 V3.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-5 - Clear All Parameter Notifications Command; Clear All Parameter Notifications Packet Description; Get System Status Command (MC-12); Get System Status Command Packet Description

Lexicon, Inc.
MC-12 Serial Communications Protocol Printed on: 08/18/03
© 2003 Lexicon, Inc. All rights reserved. 44 of 94
Data Type: Null (0x00) terminated ASCII string.
Max Length: 21 (20 characters plus terminating Null)
7.3.44 MC-12 Clear All Parameter Notifications (MC-12)
Request to the MC-12 to disable all MC-12 parameter notifications.
7.3.44.1 Command Packet Description
Application Header:
Command MC_CMD_CLEAR_ALL_PARAM_NOTIFICATIONS 0x3D
Data Count 0 0x00
Application Data:
N/A
7.3.45 MC-12 Get System Status (MC-12)
Request to MC-12 for its current system status. MC-12 will respond with “System Status Packet”.
7.3.45.1 Command Packet Description
Application Header:
Command MC_CMD_GET_SYS_STATUS 0x3E
Data Count 0 0x00
Application Data:
N/A
7.3.45.2 System Status Response Packet
Application Header:
Command MC_RESP_SYS_STATUS 0x94
Data Count 10 0x0A
Application Data:
Data[0] System Volume nn
Data[1] Current Input nn
Data[2] Current Effect Id nn
Data[3] Current Input Sample Rate nn
Data[4] Current Input Format nn
Data[5] Mute Active nn
Data[6] Effect Bypass nn
Data[7] Left/Right Balance nn
Data[8] Front/Back Balance nn
Data[9] Video Sync nn
7.3.45.3 Data Description
System Volume: