Lexicon MC-12 - 2 Ch Status; Dolby D Status

Software Version 2.0 Release & Errata Notes
Lexicon
24
@@@
DOLBY D STATUS
• Available when the remote control SHIFT-STAT command is
executed and a Dolby Digital input source is present.
• Features L, C, R, SL, SR, and LFE level meters.
Parameter Values
INPUT The name of the selected input
MODE The name of the selected listening mode
CHANNELS 3/2.1, 3/2, 3/1, 2/2, 2/1, 2/0, 1/0
BIT RATE 32 to 640kbps
EX ENCODING MATRIX, NONE
SAMPLE RATE 48kHz
2.0 ENCODING ON, OFF
DIALOG OFFSET -31 to 0dB
MIX ROOM SMALL, LARGE
CENTER MIX LVL -3.0dB, -4.5dB, -6.0dB
SURROUND MIX LVL +0.0dB, -3.0dB, -6.0dB
STATUS menu parameter descriptions begin on page 28 of this
document and on page 5-20 of the MC-12 User Guide (Rev 1).
2CH STATUS
• Available when the remote control SHIFT-STAT command is
executed and a 2-channel input source is present.
• Features L and R level meters.
Parameter Values
INPUT The name of the selected input
MODE The name of the selected listening mode
INPUT TYPE ANLG, DOLBY D, PCM
SAMPLE RATE 44.1kHz, 48kHz, 88.2kHz, 96kHz
STATUS menu parameter descriptions begin on page 28 of this
document and on page 5-20 of the MC-12 User Guide (Rev 1).
v1.1