Mode Adjust Lexicon
5-30
2CH BYPASS
This listening mode sends 2-channel analog audio input signals to
the Main Zone audio output connectors labeled Front L/R with no
internal processing.
The 2CH BYPASS listening mode is automatically activated
whenever a 2-channel analog source is present and the MAIN ADV
menu ANALOG BYPASS parameter is set to ON. The 2CH BYPASS
listening mode is not available when a digital source is present and
the MAIN ADV menu INPUT SELECT parameter is set to AUTO.
Pressing the remote control SHIFT then 2CH buttons toggles the MAIN
ADV menu ANALOG BYPASS parameter between ON and OFF.
Note:
Speaker crossover settings, speaker distances and audio controls (tone) are
not available when the 2CH BYPASS listening mode is activated.
LIVE! SMALL, LIVE! MED & LIVE! LARGE
LIVE! (Lexicon Intelligent Variable Environment) is a proprietary mode
designed to transform the way your listening room sounds. It provides
a realistic illusion of a larger, more reverberant listening space. LIVE!
SMALL simulates the reverberations of a room that is small, but larger
than an average living room. LIVE! MED simulates the reverberations of
a small hall. LIVE! LARGE simulates the reverberations of a large hall.
LIVE! requires two permanently mounted microphones. (See “LIVE!
CALIBRATION” on page 3-70 for placement and calibration instruc-
tions.) LIVE! cannot be used with prerecorded sources such as CDs or
DVDs
.
MODE ADJUST 2CH BYPASS
LIVE! SMALL parameter settings:
Parameter Default Setting Possible Settings
MID RT 597ms 115ms to 15.4s
BASS RT 597ms 23ms to 30.8ms
ROLLOFF 3.1kHz 500Hz to 20kHz
TREB CUT RT 3.1kHz 500Hz to 20kHz
PRE-DELAY 10ms 10ms to 100ms
ADVANCED
CUSTOM Refer to page 5-32
LIVE! SMALL ADVANCED parameter settings:
Parameter Default Setting Possible Settings
REVERB LVL +0dB –80dB to +0dB
EARLY RFLX LVL –13dB –80dB to +12dB
BASS XOVER 156Hz 30Hz to 19.9kHz, OFF
SHAPE 0 0 to 4
SPREAD 0% 0% to 100%
SIZE 19m 4m to 60m
LIVE! SMALL
MODE ADJUST
LIVE! MED LIVE! LARGE
OR
OR