Lexicon MC-8 User Manual

MC-8 Setup
3-9
ANLG IN LVL AUTO, –18dB to +12dB
Opens the ANLG IN LVL menu, which is used to adjust the 2-channel
analog audio input levels for the selected input. Despite attempts at
standardization, analog audio sources have a wide range of levels. To
compensate for this, the MC-8 allows independent input level
adjustment for each of its stereo analog audio input connectors.
Input level adjustment is not available for the 5.1-channel
analog audio input connectors.
* This parameter cannot be adjusted.
Note:
Adjustments made in the ANLG IN LVL menu are applied to the stereo
analog audio input connector assigned for the selected input. When
another stereo analog audio input connector is assigned, these
adjustments are automatically applied to the new connector.
ON
OFF
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
DVD1 ANLG IN LVL
AUTO
RL
AUTO GAIN
ON
+0.0dB
+0.dB
MANUAL
dB
0
-6
-15
-30
-45
-18 to +12dB
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
MIC
D
DVD1
COAX-1
NONE
AUTO
S-Video-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
MAIN ADVANCED
INPUT SETUP
DVD2
TV
SAT
VCR
CD
TUNER
AUX
DVD1
LIVE! CALIBRATION
ZONE2 IN DIGITAL
LIVE! MED
INPUTSSETUP DVD1 ANLG IN LVL
Parameter Possible Settings
AUTO ON, OFF
MANUAL –18 to +12dB
AUTO GAIN* –18 to +12dB

Lexicon MC-8 Specifications

General

Brand	Lexicon
Model	MC-8
Category	Controller
Language	English