Lexicon MC-8 User Manual

Setup Lexicon
3-28
SPEAKER SETUP PARAMETERS (continued)
FRONT L/R FULL, FULL + SUB, 30 to 120HZ, THX 80HZ
Assigns a crossover point for the Main Zone audio output connectors
labeled Front L/R when a custom speaker setup is selected. Opens the
FRONT L/R SPEAKERS menu to select a crossover point for the Front
L/R output connectors.
•Select FULL to send a full-range signal to the front speakers.
Otherwise, select the crossover point closest to the low-
frequency rating of the front speakers.
•Select FULL + SUB to send a full-range signal to the front
speakers and duplicate bass frequencies to the SUB output.
(The set crossover point of the SUB parameter determines the
upper range of duplicate bass.) Selecting the FULL + SUB
option can result in excessive bass.
When a THX speaker setup is selected, a THX 80Hz crossover point is
applied to the Front L/R output connectors, and the FRONT L/R
parameter cannot be adjusted.
CENTER FULL, FULL + SUB, 30 to 120HZ, THX 80HZ, NONE
Assigns a crossover point for the Main Zone audio output connector
labeled CENTER when a custom speaker setup is selected. Opens the
CENTER SPEAKER menu to select a crossover point for the CENTER
output connector.
• Select FULL to send a full-range signal to the center speaker.
Otherwise, select the crossover point closest to the low-
frequency rating of the center speaker.
• Select FULL + SUB to send a full-range signal to the center
speaker and duplicate bass frequencies to the SUB output. (The
set crossover point of the SUB parameter determines the upper
range of duplicate bass.) Selecting the FULL + SUB option can
result in excessive bass.
• When the speaker setup does not include a center speaker, select
NONE to redirect center channel signals to the Front L/R output
connectors – unless the 5.1a BYPASS listening mode is activated. In
this case, configure the speaker setup with the associated DVD-A/
SACD player to redirect center channel signals.
When a THX speaker setup is selected, a THX 80Hz crossover point is
applied to the Center output connector, and the CENTER parameter
cannot be adjusted.
SPEAKERSSETUP CUSTOM SETUP FRONT L/RSET CROSSOVERS
SPEAKERSSETUP
SET CROSSOVERS THX SETUP
SPEAKERSSETUP CUSTOM SETUP CENTERSET CROSSOVERS
SPEAKERSSETUP
SET CROSSOVERS
THX SETUP

Lexicon MC-8 Specifications

General

Brand	Lexicon
Model	MC-8
Category	Controller
Language	English